Projects
T.Rowe Pipe prides itself on our impeccable ability to provide quality work on each project we have completed. To date, T.Rowe Pipe has maintained a weld rejection rate below 2% and a safety record of zero lost time work cases.
T.Rowe Pipe Project History
February 2008
ConocoPhillips Refinery - Piping Stanchion Rebuild, Ponca City, Oklahoma
Contact Person: Blake Seals (580) 767-2806
- Shop fabricated structural steel replacement stanchions. Field installation of temp. supports and replacement stanchions. Provided welders, riggers, painters, and scaffold builders. Phase II (ongoing project)
October 2007
ConocoPhillips Refinery - Butamer Turnaround, Ponca City, Oklahoma
Contact Person: Danny Barnett (580) 767-6487
- Fabrication, PWHT, 100% RT, blasting/coating of carbon steel piping spools. Piping sizes ranged from 1/2" Sch 160 through 14" Sch 30 and consisted of 1000+ welds.
September 2007
ConocoPhillips Refinery - Piping Stanchion Rebuild, Ponca City, Oklahoma
Contact Person: Blake Seals (580) 767-2806
- Shop fabricated structural steel replacement stanchions. Field installation of temp. supports and replacement stanchions. Provided welders, riggers, painters, and scaffold builders. Phase I (4 month project)
August 2007
ConocoPhillips Refinery - API Hot Taps, Ponca City, Oklahoma
Contact Person: Rod Cross (580) 767-3556
- Fabricated nozzles and field installed API hot taps at various locations using temper-bead techniques and low-hydrogen root beads, fill and caps.
June 2007
ConocoPhillips refinery - Propane Bullets Coating, Ponca City, Oklahoma
Contact Person: Dale Hall (580) 767-3994
- Internal and external blasting, coating, and jeeping of various propane bullets in the refinery. (SSPC-10/International Paint)
May 2007
ConocoPhillips Refinery - Deaertor Piping Replacement Piping, Ponca City, OK
Contact Person: Wayne Winkle (580) 767-5629
- Fabrication, PWHT, 100% RT, blasting/coating of carbon steel piping spools. Piping sizes ranged from 1/2" Sch 160 through 10" Sch 40 and consisted of 1200+ welds.
March 2007
ConocoPhillips Refinery - #4 Crude Unit Turnaround, Ponca City, Oklahoma
Contact Person: Rick Sands (580) 767-1995
- Fabrication, PWHT, NDE, blasting/coating of carbon steel and 9Cr/1Mo piping spools consisting of 1,500+ welds.
January 2007
ConocoPhillips Refinery - Steam/Condensate Manifolds, Ponca City, Oklahoma
Contact Person: Dale Hall (580) 767-3994
- Provided material, fabrication, NDE, blasting/coating of new steam/condensate manifolds for all units of the refinery.
October 2006
ConocoPhillips Refinery - Alky Turnaround, Ponca City, Oklahoma
Contact Person: Danny Barnett (580) 767-6487
- Fabrication, PWHT, NDE, PMI, blasting/coating and delivery of carbon steel, low-temp, and Monel piping spools consisting of 2,300+ welds.
July 2006
ConocoPhillips Refinery - FCC&FGRU Turnaround, Ponca City, Oklahoma
Contact Person: Blake Seals (580) 767-2806
- Fabrication, PWHT, NDE, PMI, blasting/coating and delivery of carbon steel, low-temp, and Monel piping spools and steam and condensate headers consisting of 5,200+ welds.
May 2006
ConocoPhillips Refinery - Wet Gas Scrubber Project, Ponca City, Oklahoma
Contact Person: David Newland (580) 767-5575
- Fabrication, PWHT, NDE, blasting/coating and delivery of carbon steel, 9Cr/1Mo, and 316SS piping spools. Piping sizes ranged from 2" through 16" and consisted of 2,500+ welds.
March 2006
ConocoPhillips Refinery - Furnace Upgrades, Ponca City, Oklahoma
Contact Person: Rick Sands (580) 767-1995
- Fabrication, NDE, blasting/coating and delivery of 320 carbon steel fuel gas headers for various furnace heaters.
January 2006
H.M.T., Tonkawa, Oklahoma
- Fabrication of internal stainless steel piping spools and nozzles for API tanks throughout the Mid-West region.
October 2005
ConocoPhillips Refinery - Cogen Rebuild Project, Ponca City, Oklahoma
Contact Person: Ref-Chem, David Hornberger (580) 767-2905
- Fabrication, PWHT, NDE, blasting/coating and delivery of carbon steel piping spools. Piping sizes ranged from 1/2" Sch 160 through 24" Sch 60 and consisted of 4,900+ welds.
August 2005
ConocoPhillips Refinery - Plant Isolation Blinds, Ponca City, Oklahoma
Contact Person: Theresa King (580) 767-1995
- Fabricated and delivered 1000 isolation blinds ranging from 3/4" through 14" in size utilizing in-house CNC Plasma Cutting machine.
June 2005
ConocoPhillips Refinery - East Plant Turnaround, Ponca City, Oklahoma
Contact Person: Gary Coltharp (580) 767-1995
- Fabrication, PWHT, NDE and delivery of carbon steel and 9 Cr/ 1 Mo piping spools. Piping diameter ranges were 2" through 14" and consisted of 1,400+ welds.